Crane EE-7272 Bedienungsanleitung PDF herunterladen (Seite 27)

With timber provided by contractor

≤ 10 cm

The infill is made with timber 50 cut

to size. Fig. 30.

– With an infill > 2.5 cm, tie centrally in

the timber.

– The alignment couplers BFD 20 are

arranged the same as with standard

elements.

– The wingnut swivel plate must overlap

the frames of the adjoining elements

by at least 1 cm.

TRIO Filler Plate LA from 6 to 36 cm.

Always place tie through the infill 52!

With identical infills on both sides, the

compensation waler TAR 85 23 is

attached with the hooks from above.

Fig. 31. Tie is placed in upper tie hole

a. Fig. 31a.

The lower compensation waler TAR

85 23 must be attached to the strut

with the hooks from below if a TRIO

element, e.g. multipanel TRM 72, is

present on the opposite side. Fig. 31b.

Tie is placed in the lower tie hole b.

Fig. 31a.

Fig. 31

Fig. 30

Fig. 31a

Fig. 31b

B4 Infill

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Keine Kommentare

Crane EE-7272 Bedienungsanleitung Seite 27